Easy access tip, gun & hose holders built onto handle
Lifetime frame warranty
General Triplex Plunger Pump
Ceramic components run cooler, last longer
Easy to maintain and rebuild; includes a 5 year warranty
Thermo Sensor
Prevents overheating in bypass mode
Low oil shutdown protects the engine and pump
Professional Quality Gun/Wand Assembly
5 quick connect nozzles: 0º, 15º, 25º, 40º, chemical application
50 feet of steel reinforced high pressure hose
Product Image Disclaimer: "PED is not responsible for any variances from the product in the image and the item you purchase due to supply chain issues. Please review all product specs prior to purchase."
California residents see
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Do you own this product? Please share your insights with fellow shoppers.
Product Q&A
(3)
Product QuestionsAnswered by Jim, the Pressure Washer Expert
With the Pressure-Pro 6000 PSi Honda model, is there an additional attachment or some part that will allow the machine to shoot out hot water?
Jorge
from Maryland
June 01, 2011
Answer
There is an attachment for this, but you would have to add a burner system on the pressure washer. You would not want to run hot water directly through the pump, as this is a cold water pressure washer.
Thanks,
Pressure Washers Direct
Was this answer helpful?
Yes
0
No
0
Bill,
I own a const. co. and we are repairing flood damaged basements. We will install a waterproof cement coating, but on some of the basements, we must remove the paint coatings, to allow the new coating to bond to the cement block.
I need a power washer that will cut off the old paint residue. Also what is the scoop on the rotating tips, as one supplier stated this will improve the cuttting action of the washer.?
I have read the spec. on the 5000-6000 psi models? is this the right machione to do the job?
roger
Roger
from Iowa
April 09, 2011
Answer
For your application, a pressure washer above 5000 psi would work perfectly. A psi rating of this high should have no problem removing the paint with ease.
In regards to a rotating turbo nozzle, these attachments increase your pressure by about 200 psi and work great for hard to remove areas. These nozzles use a jet stream pattern that rotates in a circle which absolutely increases the capability of the machine. Using this type of nozzle would speed up the process significantly.
I'm posting a link below to the turbo nozzle we carry:
Is there a right angle pressure washer wand for any washer?
I need to clean(again) the sides of my house. I have to use an extension ladder and the angle I need for a standard wand really is dangerous. I have done this at least twice and always dreamed of a right angle wand. I'm used to being up high. My job involves climbing the antenna masts on US Navy ships so the height ain't the problem. I would like not to have to lean back to get most areas.
Peter Notarfrancesco
from Pennsylvania
March 27, 2011
Answer
There is not a right angle spray wand is made but there are some attachments that can be used. We carry a Hyde Pivot Wand or a General Pump gutter cleaner/underbody attachment that would assist you in your application.