How To Pick The Perfect Replacement Pressure Washer Pump
If your pressure washer turns on, but won't pressurize water, don't give up on ...
%20Vertical%20Axial%20Pressure%20Washer%20Pump%20Kit)
Local Pickup FAQ's
Hover to zoom
1 of 7
OEM Technologies Fully Plumbed 2400 PSI 2 GPM (7/8" Shaft) Vertical Axial Pressure Washer Pump Kit
Model:
90025
+
Share This Product
Recommended Accessories
Expert Recommended Accessories
Selected by Jim, our Expert
Optional Accessories
6
Model: 80143
$27.00
Factory-Direct
Model: KIRK01
$29.99
Only 4 In-Stock
$42.99
Backordered
Model: 2100306
$133.99
Factory-Direct
Model: 80165
$80.00
Only 4 In-Stock
$28.00
Factory-Direct
Features
Grade
Consumer
Style
Gas
Inflow
Garden Hose (Female)
Outflow
22m Threaded (Male)
- Direct Drive Vertical Axial Replacement Pump
- Great for power washers that can support 2400 PSI at 2.0 GPM
- Save money by replacing the pump instead of buying a new power washer
- 7/8" Shaft & SAE Gas Engine Flange
- SAE standard bolt pattern fits most gas-powered pressure washers
- Designed for gas-powered pressure washers with vertical engines
- Thermal Relief Protection (TRV)
- Protects the pump from overheating while in bypass mode
- Releases small amounts of hot water and intakes cooler water to extend pump life
- Maintenance-Free Crankcase
- Prefilled with oil & sealed for simple installation, no oil changes
- Fully anodized die-cast aluminum for protection against corrosion
- Aluminum Pump Head w/ Silver Aluminum Body
- Sturdy and long-lasting; resists corrosion
- Improved seal life prevents water leaks for higher efficiency
- Stainless-Steel Pistons & Integrated Unloader
- Better wear & friction resistance extends seal life
- Integrated unloader with easy start system makes start up a breeze
- Threaded M22 Pump Outlet & 3/4" Garden Hose Inlet
- Check your pressure washer's inlet & outlet orientation to ensure compatibility
- Complete Kit for Easy Installation
- Includes detergent siphon tube with filter
- New mounting bolts, 3/16" shaft key for tight connection & instruction manual
- Be Sure To Measure Flange Bolt Holes & Shaft Accurately!
- There is a 25% restocking fee on returned pumps
- See the Owner's Manual (under the Specs tab) for dimensions
- Please Call Us For Sizing Assistance w/ Information Below:
- 1. Age of Pump and Model # (must be no more than 15-yrs old)
- 2. Is the pump Vertical or Horizontal
- 3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
- 4. Engine Brand and HP (model # if available would be helpful)
- ***Shaft Size Measurements Must Be Precise***
California residents see
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
For more information go to: www.p65Warnings.ca.gov
Specifications
90025
General Information
Product Category
Pressure Washer Pumps
Overview
Product Category
Pressure Washer Pumps
Weight
6 Pounds
Consumer Warranty
1 Year
Product Length
10 Inches
Product Width
10 Inches
Product Height
7.5 Inches
Power Type
Gas
UPC
879399001451
Accessories
Pump Brand
OEM
Pump Type
Axial Cam
Shaft Size
7/8
Pump Design
Vertical
Adjustable Pressure
No
Accessory Grade
Consumer
Accessory Style
Gas
Inflow
Garden Hose (Female)
Outflow
22m Threaded (Male)
Maximum GPM
Maximum GPM
Gallon per Minute
2
Rated PSI
2400 PSI
Chemical Injections
Siphon Tube
Reviews
(21)
OEM Technologies 90025 Reviews & Ratings
Customer Rating
4.76
(21 Ratings)
5
(17)
(17)4(3)
(3)3(1)
(1)2(0)
(0)1(0)
(0)
Washer
By Tony R.
Texas
Purchased 09/01/2023 |
Review Posted 09/22/2023
Part was received in good time work great. Thank you.
Tony R. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
4/5
5/5
Pros:
Easy To Use, I39d Buy It Again
Cons:
None
Product Works Well On My Pressure Washer.
By Steve S.
Madison, Wisconsin
Review Posted 08/19/2021
I did need to add some spacers for it to fit properly around the motor casting. Pressure was exactly what I was looking for.
Steve S. Recommends This
Was this review helpful?
Rating Breakdown
4/5
5/5
5/5
5/5
Pros:
Price, High Quality
Cons:
Anchors were not long enough to go through the motor casting.
Not Shown As Pump Received
By John A.
Abilene, Texas
Purchased 07/02/2021 |
Review Posted 07/09/2021
The picture of the pump does not represent what you get. The valves on my pump I got are plastic and the hose tube from the pump is plastic. Very cheap built pump.
John A. Does Not Recommend This
Was this review helpful?
Expert Response
First and foremost thank you for your purchase of the OEM Technologies Fully Plumbed 2400 PSI 2 GPM Vertical Axial Pressure Washer Pump Kit. We appreciate you taking the time to provide us with your feedback and we can certainly understand your aggravation. The pump is built with plastic valves and the hose is plastic. We will update our site to make sure this is stated in the features.
We appreciate your business and apologize for any inconvenience.
We appreciate your business and apologize for any inconvenience.
Dale V.
Power Equipment Expert
Rating Breakdown
3/5
2/5
3/5
2/5
Cons:
Low Quality, Expensive
Great Product Great Price
By Orlando R.
Palm Bay, Florida
Purchased 04/26/2021 |
Review Posted 05/19/2021
Very happy with the purchase. Perfect fit and rep. was very friendly and courteous, thank you.
Orlando R. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Price, Id Buy It Again, High Quality, Easy To Use
Cons:
Non
Great Replacement Pump
By Walter S.
Norman, Oklahoma
Purchased 08/11/2020 |
Review Posted 09/23/2020
The pump fit and I was able to install it on my existing pressure washer engine with minimal issues. I like that the pump is a sealed pump so you do not have to add oil prior to assembly. So far the pump has worked as designed.
Walter S. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
4/5
Pros:
Id Buy It Again
Works Fine
By Ed C.
Raymore, Missouri
Purchased 08/24/2020 |
Review Posted 09/16/2020
Outlet was different size had to get fittings for hose, connections are reversed, but works fine. I am happy with the pump and service I received.
Ed C. Recommends This
Was this review helpful?
Rating Breakdown
4/5
4/5
4/5
4/5
Pros:
Price, Id Buy It Again
Fit Perfectly
By Rich G.
Atlantic Highlands, New Jersey
Purchased 08/12/2020 |
Review Posted 08/15/2020
This replaced my pump on my Briggs & Stratton. I was nervous that it wouldn't fit because it's not exactly the same layout. It fit perfectly and works great!
Rich G. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Price, Id Buy It Again, High Quality, Light Weight
Works Perfectly And Super Easy To Install
By Noah C.
Cedar, Michigan
Review Posted 06/23/2020
First time I have ever replaced a pump. 3 bolts and it slipped right on. Works great, no leaks, well made.
Noah C. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Price, Id Buy It Again, High Quality, Durable
Great Product
By Kris M.
Sparks, Nevada
Purchased 05/27/2020 |
Review Posted 06/19/2020
Great product, easy to install and works great.
Kris M. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Exceeded Expectations
Replacement Pressure Washer Pump
By Roger E.
Alton, New Hampshire
Purchased 05/18/2020 |
Review Posted 06/10/2020
The price of the replacement pump was a good price, it fits great, and works great.
Roger E. Recommends This
Was this review helpful?
Rating Breakdown
5/5
5/5
5/5
5/5
Pros:
Id Buy It Again
How-To Articles
How to Replace the Pump on a Pressure Washer
Pressure washer pumps can be burned out in many ways. It's more common than you...
Power Equipment How-To Library
Articles, Tips and Buying Guides from Our Experts
Manuals
90025
%20Vertical%20Axial%20Pressure%20Washer%20Pump%20Kit%20%7C%20OEM%20Technologies%2090025&p[url]=https%3A%2F%2Fwww.powerequipmentdirect.com%2FOEM-Technologies-90025%2Fp93942.html&p[summary]=Buy%20the%20OEM%20Technologies%2090025.%20Factory-direct%20at%20Power%20Equipment%20Direct.%20Also%2C%20read%20the%20latest%20reviews%20for%20the%20OEM%20Technologies%20Fully%20Plumbed%202400%20PSI%202%20GPM%20(7%2F8%22%20Shaft)%20Vertical%20Axial%20Pressure%20Washer%20Pump%20Kit&p[images][0]=https%3A%2F%2Fwww.powerequipmentdirect.com%2Fproducts-image%2F500%2F90025_93942_1000_a37cdb4b12376d19c87b48e879e5fe98.jpg){kind=link}
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
OEM Technologies Fully Plumbed 2400 PSI 2 GPM (7/8" Shaft) Vertical Axial Pressure Washer Pump Kit
Customer Review Images
