Why Remove Bark From a Log?

Why Remove Bark From a Log?

How to Debark a Log with a Chainsaw Tool

Dale, the Power Equipment Expert
By 
Power Equipment Expert

When you picture a log cabin or a rustic piece of furniture made with wood that someone milled with a sawmill, you might imagine some bark somewhere on that wood.

But if you're interested in using the trees you've felled to create furniture, fencing, or housing, removing the bark from the wood is one of the most practical steps you can take.

Debarking your logs takes time, but it can help your logs look neater and last longer. Luckily for you, you can find plenty of tools and tips to make the job easier.

 

Why Is Debarking Important?

Spruce Tree with Some Bark PeeledWhile a tree is growing, its bark provides a layer of protection against harsh weather conditions and pests like fungi and insects that can wound or destroy the wood underneath.

Once a branch has been cut or a tree has been felled, however, instead of providing protection, the bark can sustain conditions that might cause damage:

  • The bark can retain moisture.
    A tree needs water and moisture to live, but a log that's been cut is no longer alive. As a result, any moisture trapped beneath the bark can cause the wood to rot.

    Plus, wood has to dry out to become usable lumber. Woodworkers recommend using wood with six to eight percent moisture content for indoor items like furniture, 12 to 20 percent moisture content for lumber used outside. If you're working with wood planks, it takes about a year per inch of thickness of the plank to properly season it.

    Debarking helps speed the drying process.

  • The bark can provide a hiding place for insects.
    After a log has been cut or a branch has been severed, insects have new openings that allow them to slip beneath the bark more easily. There, they can multiply and thrive, and they don't need much space. Emerald ash borer larvae can burrow and start to develop less than an inch beneath a tree's outer bark.

  • The bark can trap dirt and debris.
    This is a concern for anyone who plans to use a chainsaw to cut large logs down into smaller pieces. Dirt is one of a chainsaw's biggest enemies; it contains particles like silica that can wear down a chain. The amount of dirt that bark can trap can dull your chain quickly.

Debarking your logs isn't just good for your wood. It's also good for the tools you use to work with it.

 

What Debarking Tools Are Available?

You can use all sorts of tools to peel bark. Different tools are better suited for logs of different sizes:

  • Knives and axes
  • Draw knives
  • Bark spuds
  • Chainsaw-powered bark peelers

Knives and Axes

Debarking with an Axe or HatchetIf the log or branch you're stripping is less than 2" in diameter, a chainsaw is likely to prove unwieldy. Instead, hold the branch vertically, and slide a knife or a small hand axe beneath the bark lengthwise to remove the bark in peels. This technique works well with saplings.

 

Draw Knives

Using a Draw KnifeA draw knife is a bow-shaped, two-handled knife that's recommended for debarking medium-sized logs 3" to 8" in diameter as well as for planing logs to square their surfaces.

To use a draw knife, lay your log in a steady place where it won't roll. Stand, sit, or crouch at one end of the log, wedge the edge of the knife just beneath the bark at a point far across from you, and carefully pull the knife toward you, taking care to stop the knife several inches away from your body.

 

Bark Spuds

Logs to be Debarked with a Bark SpudIf you're peeling bark from a log larger than 8" in diameter, chances are that you'll keep your log lying on the ground while you work. This might make turning the log to peel every side more difficult, which makes a tool as wide as a draw knife less effective.

To debark the largest logs, turn instead to a bark spud.

Imagine scraping the bottom of a pan with a spatula after you've cooked dinner, and you have an idea of how to use a bark spud. Simply slip the beveled edge of the bark spud beneath the bark and push against the handle so that the bark peels away from the wood.

 

Chainsaw-Powered Bark Peelers

Log WizardTools like axes, draw knives, and bark spuds are effective and inexpensive, but they can be exhausting to use. To keep yourself from getting fatigued, consider using a chainsaw-powered bark peeler instead.

Bark peelers like the Log Wizard attach to almost any chainsaw and use the saw's power to strip bark from the wood. They also can be used for several other chores:

  • Planing wood
  • Notching wood
  • Sharpening wood to a point

Your chainsaw bark peeler might require a longer chain than you typically use with your chainsaw. Read the bark peeler's manual to determine how much longer your chain should be, and make sure you choose a chain with the right pitch and gauge for your saw and bar.

 

Tips for Debarking Logs

WoodworkerThe best time to debark your logs with any kind of tool is springtime. During the spring, trees are actively growing, which makes the layer just below the bark slippery, wet, and much easier to peel than it would be in autumn, after the wood has had time to dry.

If you're stripping bark from drier, more difficult wood, you might find that a draw knife provides the most stability and is the easiest tool to use.

To strip the last tricky pieces of bark from a log, some people have found a powerful pressure washer to be a helpful tool. This has the advantage of also removing some of the slippery residue that might be left after the bark has been peeled.

Whether you're a forestry professional, a furniture maker, a woodworker, or even a farmer or rancher, you can get the most out of trees you fell and branches you cut by repurposing them - and you can keep them in the best condition for reuse by debarking them.

 

NEXT: How to Maintain Your Chainsaw

Dale, the Power Equipment Expert
By 
Power Equipment Expert
Was this article helpful?