Hover to zoom

1 Of 5

Red Lion 12 GPM 1-1/2 HP Deep Well Submersible Pump (3-Wire 230V)

Name: Red Lion 12 GPM 1-1/2 HP Deep Well Submersible Pump (3-Wire 230V)
Brand: Red Lion
SKU: 7508
Price: 832.00 USD
Availability: InStock
Rating: 4.72 (32 reviews)

Model:

14942408

Write A Review

$832.00

Free Shipping

Only 1 In-Stock

Ships Monday, Apr 22nd

Shipping to60601

Red Lion 12 GPM 1-1/2 HP Deep Well Submersible Pump (3-Wire 230V)

Model: 14942408

$832.00

Accessories

Features

Specifications

Reviews

Product Q&A

How-To Articles

Manuals

Expert Recommended Accessories Selected by Jim, our Expert

Required Accessories 9

These accessories are required to properly setup/install this product.

Optional Accessories 10

Features

Inlet Size

N/A

Style

Deep Well

GPM

12 Gallons

4" Submersible Deep Well Pump
Ideal for use with 4" I.D. or larger wells
Powered By Industry Standard 3-Wire 230V Motor
Proven superior quality & performance ensuring quiet operation
Hex Rubber Bearing w/ Extra-Large Surface
Provides shaft stability and multiple flow channels
Keeps small particles such as sand away from bearing surfaces
Built-In Check Valve
Prevents back-flow and ensures system pressure
Built-In Suction Screen
Helps to prevent debris from clogging impellers
1-1/4" NPT Thermoplastic Discharge Head
Provides full-flow performance without the risk of corrosion
Requires 1-1/2 HP Red Lion Control Box "RLCB15-230"
CONTROL BOX SOLD SEPARATELY

Specifications

14942408

General Information

Product Category

Water Pump

Motor

Voltage

240 Volt Single-Phase

Wire

3-Wire

Pump

Gallons Per Minute

12 Gallons

Outlet Diameter

1-1/4 Inch

Housing Material

Stainless Steel

Impeller Material

Plastic

Maximum PSI

Total Head Lift

500 Feet

Submersible

Yes

Engine

Continuous Operation

Yes

Horsepower

1.5 hp

Overview

Product Category

Water Pump

Weight

36 Pounds

Made in USA

Consumer Warranty

3 Years

UPC

010121141841

Additional Model Numbers

RL12G15-3W2V, 14942408

Accessories

Control Box

Sold Separately

Reviews

(32)

Red Lion 14942408 Reviews & Ratings

Product Q&A

(10)

Product Questions Answered by Jim, the Water Pump Expert

Does this pump have a rope tie-off to prevent losing it in the well?

David M.

from Arkansas

March 14, 2018

I have read that this pump utilizes a Franklin motor, is this true?

Ken K.

from Texas

May 10, 2017

Hi Jim, We are having to replace our well pump with a new pump. I would like to find out if this is the correct pump for our well. The well is 505 feet deep with the pump i believe sitting at 500 ft. Our well is a low producing well at just 1.125 gpm. with a static level of 194 feet from the top of the well. Would this pump be the correct pump for us?

Heidi Ott

from Washington

July 05, 2016

Answer

Heidi,

Thank you for your interest in Water Pumps Direct. Before I can really make an educated suggestion on what pump you would need for your application, I would need to know the following specifications and requirements:

Depth of your well-505FT

Standing Water Level-194ft

Well Recovery Rate or Pumping Water Level-1.125

GPM & PSI Requirements-

Total pumping distance including any elevation variance-

Number of Sprinkler Heads (if zoned, per zone) And Their Individual GPM & PSI Requirements (if applicable)-

Total Distance from The Pump to The Furthest Sprinkler and Any Elevation Variance (if applicable)-

If you can supply this information, I'll be happy to assist you further.

Was this answer helpful?

Yes

i wont to drop a pump 375 ft down in a 405 ft well what pump do i need for a 2 wire with ground

Wilburn

from Georgia

July 03, 2016

Answer

Thank you for your interest in Water Pumps Direct. Before I can really make an educated suggestion on what pump you would need for your application, I would need to know the following specifications and requirements:

Depth of your well - 405 feet

Standing Water Level

Well Recovery Rate or Pumping Water Level

GPM & PSI Requirements

Total pumping distance including any elevation variance

Number of Sprinkler Heads (if zoned, per zone) And Their Individual GPM & PSI Requirements (if applicable)

Total Distance from The Pump to The Furthest Sprinkler and Any Elevation Variance (if applicable)

If you can supply this information, I'll be happy to assist you further.

Was this answer helpful?

Yes

In have 4 inch ID pvc well casing ..your product description says it will fit. What is the width of the pump?

Vince

from Indiana

June 16, 2016

I plan to replace a 30 yer old pump that is at 200 ft. and lower the new pump to 250 ft in a 400 ft deep well. Will I need to a check valve mid way up as well as at the well head?

Ken G

from California

July 27, 2015

Does wiring come with the pump

Dwight B

from Louisiana

June 11, 2015

what guage wire should be run to this pump if set at two hundred feet

Billy

from West Virginia

June 22, 2014

what parts are involved with submersible pumps that can fail and breakdown or if it doesn't work you just have to replace the entire pump?

Sal

from New York

January 22, 2014

Answer

When it comes to 2-wire deep well submersible pumps, the pump starting controls are located inside the pump. Any of these components can fail and cause the pump to become inoperable. By installing a 3-wire pump, those components would be located inside a CONTROL BOX, making repairs much easier when failure of these components are the cause of your pump not operating. Of course if the pump has failed due to burnt motor windings or some other cause, would would still need to pull and replace the pump, but you would have a better understanding of the pump status when the pump starting components are above ground as opposed to 50-500 feet or more, below ground.

Was this answer helpful?

Yes

what is the purpose of the control box and can it be eliminated?

Armand

from Ohio

July 09, 2012

Answer

Three wire submersible motors require a control box. Control boxes contain a starting relay, starting capacitors and in some cases overload protectors. Two wire submersible motors have these components built into them and do not require a control box.

One benefit of using a three wire motor with a control box is that some of the components that are subject to failure are located above ground where you can get to them without pulling the pump.

Control boxes should never be mounted in direct sunlight or in locations that are extremely hot, this causes the capacitor life to be shortened and can cause nuisance overload trips. Do not mount the control box in a humid location such as a damp well pit since voltage breakdown and corrosion will accelerate component failure in this condition.

Control boxes are designed for vertical, upright mounting only. Any other position will affect the operation of voltage sensing relays in larger sizes and may result in water leakage.

Was this answer helpful?

Yes