Answer:This and many other products are now available for order online and pickup at the Power Equipment Direct warehouse in Bolingbrook, Illinois or at a Ferguson Supply location near you.
How Do I Update My Pickup Location?
Answer:The nearest pickup location within a 50-mile radius is automatically chosen when you enter the site. To change your pickup location and see availability for other nearby locations, click the "Change Pickup Location" link on the product page or in the cart.
How Do I Place a Local Pickup Order?
Answer:Eligible items will have the Local Pickup option available both on the product page and in the cart. Select this option for all items you wish to pick up. Please note that Local Pickup can only be scheduled online at this time.
When Can Items Be Picked Up?
Answer:Items are usually ready for pickup the same day the online order is placed, but this will depend on order volume and time of day. When your order is ready, you will receive an email including specific pickup instructions. Orders that have not been picked up within two business days may be cancelled. You should opt to have your items shipped if you are not able to pick them up promptly.
Who Can Pick Up My Order?
Answer:You will be prompted to enter the name, mobile phone, and email address of the person who will be picking up the order during checkout. We will use this information to ensure the order is picked up by an authorized individual.
Why Can't I Select Local Pickup for Some Items?
Answer:Not all items are available at all locations, so pickup availability will vary based on the selected store. Additionally, some items ship directly from our manufacturer partners and are not available for pickup. You can use the "Change Pickup Location" link to check for availability at nearby Local Pickup locations.
Why Can't I Select Shipping for Some Items?
Answer:Due to packaging, shipping costs, and other factors, some items cannot be shipped and are offered exclusively through Local Pickup.
Which Payment Methods Are Accepted?
Answer:Credit/debit cards, Apple Pay, Google Pay, PayPal, and financing are accepted for Local Pickup orders.
Hover to zoom
1 Of 5
MTM Hydro Professional Long-Range Jet Foamer Kit (5000 PSI)
Constructed from brass & high grade stainless steel
1/4" female NPT threaded fitting
Adjustable Spray Pattern
Perfect for driveways, roofs, siding, even your car
33 Foot Long Chemical Hose
Over 33 feet of suction power; lets you work in a wide area
3 Stainless Steel Spray Heads Included
Yellow 3.5 orifice for 2.5 to 3.0 GPM 3000 PSI pressure washers
Red 5.0 orifice for 3.5 to 4 GPM 4000 PSI pressure washers
Black 6.5 orifice for 5.0 to 5.6 GPM 5000 PSI pressure washers
Factory Warranty
90 days on materials & workmanship
1100 PSI Minimum Pressure; 5000 PSI Maximum Pressure
1.8 GPM Minimum; 7 GPM Maximum
Maximum water temperature of 140° F
Fixed 80 / 20 dilution ratio
1/4" Quick Connect Plug (1/4" Male End) Needed To Connect To Quick Connect Wands
California residents see
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause Developmental Harm, and Diisononyl phthalate (DINP) which is known to the State of California to cause Cancer.
Product QuestionsAnswered by Jim, the Pressure Washer Expert
How do I use this for washing my car?
Bryce
from Arizona
September 07, 2021
Answer
Typically when using the foamer, the suction hose would be put into the container holding your cleaning chemicals.
Was this answer helpful?
Yes
0
No
0
MTM Hydro Professional Long-Range Jet Foamer Kit model 14.0289 . Will this work with a 2600psi 2.3 gpm washer? Is the nozzle adjustable for a fan like spray low, then switch more to a stream for higher application? What adapter(s) would I need to connect to my wand and would I need a two story nozzle too?
Joe Owens
from Virginia
July 10, 2016
Answer
The spray adjusts from wide to narrow; the narrow spray will travel farther than the wide one will.
I'm sorry, but the minimums for 14.0289 foamer are 3000 PSI and 2.5 GPM; I don't believe you'd get the performance you're looking for with the unit you mention. However, the MTM Hydro Long Range Foamer should work just fine, as will the BE Long Range Foamer.
If your pressure washer has a female quick connector on the end of the wand you wouldn't need an adapter for either foamer.
If you don't need a thick layer of foam, you may want to consider a 2nd Story Nozzle Kit to spray and rinse soap up to about 20 feet.
Was this answer helpful?
Yes
6
No
5
What is the mix ratio chemical - water for this foamer? Is the ratio adjustable?
Danny Price
from Tennessee
June 10, 2015
Answer
It all depends on the detergent. There is no set ratio or a way to reduce the ratio. The pressure washer will dilute the solution by 10-20%. If you would like to have a more watered down solution add water to the chemical in the bucket you will be siphoning from.
Was this answer helpful?
Yes
5
No
5
Does this shoot foam very well?
I have not tried shooting foam before, and wonder if foaming the soap works better at removing dirt/mold than regular spraying? Any advice is appreciated.
from Florida
February 27, 2012
Answer
Yes, this kit performs very good. The foaming action definitely helps in removing the dirt due to the fact that the foam causes the detergent to stick to the surface versus running off of the surface.
Was this answer helpful?
Yes
4
No
4
How-To Articles
How To Pick The Perfect Replacement Power Washer Gun
Even with the best intentions, stuff happens: the spray gun that went into the ...