Expert Recommended AccessoriesSelected by Joshua, our Expert
Required Accessories9
These accessories are required to properly setup/install this product.
Optional Accessories10
Features
Grade
Consumer
Style
Single Stage 1-Phase
CFM
10.6
Tank Size
60
Product Video Disclaimer: "PED is not responsible for any variances from the product in this video and the item you purchase. Please review all product specs prior to purchase."
Power, Air Flow and Less Service With At Least 30% Less Noise
Designed to be one of the quietest 4.0-HP compressors in the industry
Perfect for staple guns, brad nail guns, finish nail guns, nail guns, airbrushes & blow guns
Powerful 2-HP SP Series Dual Motor
Operates at only 1680 RPM creating less noise and less wear
Comes complete with 4 air filters
Ultra-Quiet at only 75 decibels
Oil-Free Dual Piston Pump
Use in a variety of temperatures (cold starts) and uneven terrains
Oil-free offers less maintenance, cost, and clean air for tools
Has a 3000+ hour life cycle before wear; comparable units are 1500 hours or less
60 Gallon ASME Steel Air Tank
Time to fill tank from empty to full - 7:00 Minutes
Recovery time from 95 PSI to 125 PSI - 2:00 Minutes
Condor Pressure Switch
Regulates air pressure in the compressor
Large easy-to-read double pressure control gauges
5 Micron Air Filter & Regulator
Removes dirt, dust, and moisture for better tool operation
Regulator maintains constant outlet pressure for tools; 3/8" port
Automatic Drain Valve
Manual timer lets you to set the time for both the frequency & duration
Routine draining prevents air contamination & prolongs tool life
Thermal Overload Protector
Protects the motor from overheating
Low amp draw at only 14 amps
Engineered for high performance & durability
California residents see
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
dBA dBASound levels are measured in decibels (dB). The lower the decibel rating, the less noise the product makes. As an example, a ticking watch is 20 dB while on the other end of the scale, a lawn mower is around 90 dB.
75
Magnetic Starter Magnetic StarterThe Magnetic Starter is the "thinking cap" for the motor of the air compressor. Magnetic starters are electromagnetically operated switches that provide a safe method for certain motors to be started under a large motor load.
No
Amp Draw
14
Recommended Breaker
Consult Certified Electrician
Pump
CFM CFMCubic Feet Per Minute, which indicates the compressor's flow rate - or the amount of air that a compressor can produce at a given pressure level. Typically compressors that have higher CFM ratings are able to provide more air, which makes them ideal for larger applications
10.6
CFM Rated @
90 PSI
CFM @ 40 PSI
12.8
Pump Material
Aluminum
Max PSI Max PSIPSI, or Pounds Per Square Inch, measures the amount of pressure placed on a square inch of space. In compressor terms, PSI is the amount of force that an air compressor can deliver
125 PSI
Pump Type
Single-Stage
After Cooler After CoolerAn aftercooler is a mechanical heat exchanger designed to remove the heat and moisture of compression from a compressed air stream so the air is cool and dry enough for use in air-operated equipment. A compressed air aftercooler has three primary functions: Cool the air discharged from the air compressor
No
Pump Drive
Direct Drive
Oil Type
Oil Free
Tank
Tank Size
60 Gallons
Tank Outlet
3/8 Inch
Electronic Drain Valve Electronic Drain ValveThe inexpensive and reliable electric drain valve (EDV) automatically removes condensate from your air system. It has an integral strainer to prevent clogging and saves time and money by eliminating the need for manual draining
Yes
Tank Orientation
Vertical
Filter
Regulator
Yes
Accessories
Pressure Gauge
Yes
Air Dryer
No
Air Filter
Yes
Overview
Product Category
Air Compressor - Stationary
Weight
213 Pounds
Certification
ASME
Consumer Warranty
1 Year
Product Length
21 Inches
Product Width
28.5 Inches
Product Height
66 Inches
Power Type
Electric
UPC
743369760009
Reviews
(28)
California Air Tools CAT-60040CAD Reviews & Ratings
Customer Photos and Videos
Product Q&A
(5)
Product QuestionsAnswered by Joshua, the Air Compressor Expert
What is the duty cycle for this air compressor?
Alegra
from California
November 17, 2020
Answer
This unit has a 70/30 duty cycle.
Was this answer helpful?
Yes
1
No
0
Can this unit be run on 208v?
Ryan C.
from California
April 09, 2020
Answer
This unit cannot be run on 208V.
Was this answer helpful?
Yes
4
No
0
Does this unit need to be placed indoors or can it be set up outdoors in the weather?
Gary D.
from Texas
March 16, 2020
Answer
This unit needs to be installed indoors.
Was this answer helpful?
Yes
5
No
2
Where are this compressor and all its parts made?
Roderick L.
from Pennsylvania
September 02, 2019
Answer
This compressor is assembled in the U.S., but parts are globally sourced.
Was this answer helpful?
Yes
2
No
0
Are these air compressors suitable for dry pipe fire sprinkler systems when used with a UL / FM air maintenance device?
Joe
from Massachusetts
August 23, 2018
Answer
They are not. They only have an ASME certification on the tank.
Was this answer helpful?
Yes
2
No
0
How-To Articles
How to Pick the Perfect Single-Stage Compressor
Some homeowners need air compressors occasionally for inflating tires, running ...