Local Pickup FAQ's
Hover to zoom
1 Of 5
+
Share This Product
Recommended Accessories
Expert Recommended Accessories
Selected by Melissa, our Expert
Required Accessories
9
These accessories are required to properly setup/install this product.
Optional Accessories
10
Features
Style
Membrane
Air Dryer CFM
20
Product Video Disclaimer: "PED is not responsible for any variances from the product in this video and the item you purchase. Please review all product specs prior to purchase."
- Tsunami Filter Technology
- Provides clean, dry, Grade D instrument, HEPA quality air
- 100% Duty Cycle Requires No Electricity
- 175 PSI maximum inlet pressure; 90 PSI maximum outlet pressure
- 100°F maximum inlet temperature; 20 CFM maximum inlet flow
- Micro-Flex Element
- 3 times larger than competitior's elements
- Stage 1: Water Separator
- Removes water & particulates down to 10 micron
- Stage 2: Oil Coalescing Filter
- Removes oil aerosols downt to .001 PPM
- Traps particulates down to 0.1 micron
- Stage 3: Membrane Dryer
- 3.3 CFM sweep air @ 100 PSI sends pretreated air through dryer
- Clean, dry air exits through an outlet regulator
- Easy, Low Cost Maintenance
- Designed for point of use applications
- Perfect for tool setters & positive pressure control boxes
- Protects high-end pneumatic tools
- 1/2" ball valve, precision regulator & gauge included
California residents see
Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause Developmental Harm.
For more information go to: www.p65Warnings.ca.gov
Specifications
21999-0892
Engine
HP
5
Air Dryer
Air Dryer CFM
Air Dryer CFM
All compressed air dryers have a maximum drying capacity expressed in Cubic Feet Per Minute (CFM)
20
Max Inlet Temp. Rating
Max Inlet Temp. Rating
The highest temperature the compressed air can be passing through the dryer for the dryer to operate properly and effectively
100
Max Ambient Temp. Rating
Max Ambient Temp. Rating
Ambient temperature is the air temperature of any object or environment where equipment is stored
115
Non-Cycling
Non-Cycling
Non-cycling refrigerated air dryers have refrigeration compressors that start as soon as you turn the dryer on ― and don't stop until you turn the dryer off. They are less expensive than cycling dryers and are a good choice for applications where they will constantly run at full capacity
No
Inlet Fittings
1/4"
Outlet Fittings
1/4"
Aftercooler
No
Pre-Filter
Yes
Post-Filter
No
Wall Mountable
Yes
Alarm Lights
No
Auto Drain
Auto Drain
Auto drain or drip leg drain used to drain air line of condensate and water
Yes
Regenerative
No
High Temp
High Temp
Dryers that are specifically designed to handle higher inlet temperatures than regular dryers. Typically paired with a piston or reciprocating air compressor
No
Overview
Weight
15 Pounds
Consumer Warranty
90 Days
Commercial Warranty
90 Days
Product Length
12.5 Inches
Product Width
3.5 Inches
Product Height
21.5 Inches
Reviews
Tsunami 21999-0892 Reviews & Ratings
Be the First to Write a Review
Do you own this product?
Please share your insights with fellow shoppers.
Please share your insights with fellow shoppers.
How-To Articles
How to Pick the Perfect Compressed Air Dryer
Ever heard the saying an ounce of prevention is worth a pound of cure? Well, if...
What an Air Line Filter is and How it Works
Without an air line filter - water, oil, and dirt can cause major damage to pne...
How to Pick the Perfect Refrigerated Air Compressor Dryer
Refrigerated Dryers use a cooling system similar to that of a home air conditio...
Manuals
Ask A Question!
*Required Fields
+
Thank You For Submitting Your Question
Your submission has been sent successfully. Please give our experts up to two business days to respond.
Media Gallery
Tsunami 1/2" Industrial Membrane Dryer (20 CFM)
Customer Review Images